Automate Configuration backup in Nexus OS

In my previous post i have done setting up a TFTP Server in Linux, in 10-15min,

http://www.balajibandi.com/2016/06/26/install-and-configure-tftp-under-ubuntu/

In this Section i am going to use same TFTP Server and automate the Nexus Config back up.

• IP address may have change from my previous post to this – make sure you use the IP address based on your lab / live environment.

Here is the EEM Script

event manager applet NX-OS_Conf_TFTP_Backup
event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op le entry-val 12345 poll-interval 120
action 1.0 cli command enable
action 2.0 cli copy run tftp://10.10.9.9
action 3.0 syslog priority notifications msg Running_Config_Backup_TFTP_Complete

Interval setup to 120 Second based on my requirement. – Feel free to change your requirement

here is the output log in Switch :

CORESW2 %EEM_ACTION-5-NOTIF: Running_Config_Backup_TFTP_Complete

My TFTP have file as below

# ls
CORESW2-running-config