CAT 9500 Stack Wise Virtual Configuration

Got a chance to build new Cisco Catalyst 9500 – Stackwise Virtual

Task

  1. Build Stackwise Virtual
  2. Convert Bundle to Install Mode
  3. upgrade ISSU

Physical Kit with Connection.


I Like new Cisco Blue LED Logo

Basic StackWise Config

Switch 1:

interface TwentyFiveGigE1/0/1
stackwise-virtual link 1
description ***SVL ***
!
interface TwentyFiveGigE1/0/2
stackwise-virtual dual-active-detection
description ***DUAL-ACTIVE-FAST-HELLO ***
!
interface TwentyFiveGigE1/0/47
stackwise-virtual link 1
description ***DUAL-ACTIVE-FAST-HELLO ***
!
interface TwentyFiveGigE1/0/48
stackwise-virtual dual-active-detection
description ***SVL ***
!

Switch 2:

interface TwentyFiveGigE1/0/1
stackwise-virtual link 1
description ***SVL ***
!
interface TwentyFiveGigE1/0/2
stackwise-virtual dual-active-detection
description ***DUAL-ACTIVE-FAST-HELLO ***
!
interface TwentyFiveGigE1/0/47
stackwise-virtual link 1
description ***DUAL-ACTIVE-FAST-HELLO ***
!
interface TwentyFiveGigE1/0/48
stackwise-virtual dual-active-detection
description ***SVL ***
!

Save and Reload

Connec the respected cables while reloading.

Once they reboot they form StackWise Virtual


Here is the final Config looks like :

switch 1 provision c9500-48y4c
switch 2 provision c9500-48y4c
boot system flash:packages.conf
stackwise-virtual
domain 100
!
redundancy
mode sso
!

interface TwentyFiveGigE1/0/1
stackwise-virtual link 1
description ***SVL ***
!
interface TwentyFiveGigE1/0/2
stackwise-virtual dual-active-detection
description ***DUAL-ACTIVE-FAST-HELLO ***
!
interface TwentyFiveGigE1/0/47
stackwise-virtual link 1
description ***DUAL-ACTIVE-FAST-HELLO ***
!
interface TwentyFiveGigE1/0/48
stackwise-virtual dual-active-detection
description ***SVL ***
!
interface TwentyFiveGigE2/0/1
stackwise-virtual link 1
description ***SVL ***
!
interface TwentyFiveGigE2/0/2
stackwise-virtual dual-active-detection
description ***DUAL-ACTIVE-FAST-HELLO ***
!
interface TwentyFiveGigE2/0/47
stackwise-virtual link 1
description ***DUAL-ACTIVE-FAST-HELLO ***
!
interface TwentyFiveGigE2/0/48
stackwise-virtual dual-active-detection
description ***SVL ***
!

SW-BBLAB#show stackwise-virtual

Stackwise Virtual Configuration:

Stackwise Virtual : Enabled
Domain Number : 100

Switch Stackwise Virtual Link Ports
—— ———————- ——
1 1 TwentyFiveGigE1/0/1
TwentyFiveGigE1/0/47
2 1 TwentyFiveGigE2/0/1
TwentyFiveGigE2/0/47

SW-BBLAB#show stackwise-virtual dual-active-detection

Dual-Active-Detection Configuration:

Switch Dad port Status
—— ———— ———
1 TwentyFiveGigE1/0/2 up
TwentyFiveGigE1/0/48 up
2 TwentyFiveGigE2/0/2 up
TwentyFiveGigE2/0/48 up

SW-BBLAB#show sw
SW-BBLAB#show switch
Switch/Stack Mac Address : dc8c.37ee.d7c0 – Local Mac Address
Mac persistency wait time: Indefinite
H/W Current

Switch# Role Mac Address Priority Version State

*1 Active dc8c.37ee.d7c0 15 V02 Ready
2 Standby 78bc.1a0b.ca80 14 V02 Ready

SW-BBLAB#show redundancy switchover

Redundant System Information :

   Available system uptime = 21 hours, 34 minutes

Switchovers system experienced = 0
Standby failures = 0
Last switchover reason = none

             Hardware Mode = Duplex
Configured Redundancy Mode = sso
 Operating Redundancy Mode = sso
          Maintenance Mode = Disabled
            Communications = Up

Current Processor Information :

           Active Location = slot 1
    Current Software state = ACTIVE
   Uptime in current state = 21 hours, 34 minutes
             Image Version = Cisco IOS Software [Fuji], Catalyst L3 Switch Software (CAT9K_IOSXE), Version 16.9.2, RELEASE SOFTWARE (fc4)

Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Mon 05-Nov-18 19:32 by mcpre
BOOT = bootflash:cat9k_iosxe.16.09.02.SPA.bin;
CONFIG_FILE =
Configuration register = 0x102

Peer Processor Information :

          Standby Location = slot 2
    Current Software state = STANDBY HOT 
   Uptime in current state = 21 hours, 30 minutes
             Image Version = Cisco IOS Software [Fuji], Catalyst L3 Switch Software (CAT9K_IOSXE), Version 16.9.2, RELEASE SOFTWARE (fc4)

Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Mon 05-Nov-18 19:32 by mcpre
BOOT = bootflash:cat9k_iosxe.16.09.02.SPA.bin;
CONFIG_FILE =
Configuration register = 0x102

Conver Bundle to Install Mode

SW-BBLAB(config)#boot system flash:packages.confg
SW-BBLAB#wr
Building configuration…
[OK]
*Sep 6 13:00:46.886: %SYS-2-PRIVCFG_ENCRYPT: Successfully encrypted private config file

SW-BBLAB#show boot
BOOT variable = flash:packages.conf;
Configuration Register is 0x102
MANUAL_BOOT variable = no
BAUD variable = 9600
ENABLE_BREAK variable does not exist
BOOTMODE variable does not exist
IPXE_TIMEOUT variable does not exist
CONFIG_FILE variable =

Standby BOOT variable = flash:packages.conf;
Standby Configuration Register is 0x102
Standby MANUAL_BOOT variable = no
Standby BAUD variable = 9600
Standby ENABLE_BREAK variable does not exist
Standby BOOTMODE variable does not exist
Standby IPXE_TIMEOUT variable does not exist
Standby CONFIG_FILE variable =

SW-BBLAB#install add file flash:cat9k_iosxe.16.12.01.SPA.bin activate commit
install_add_activate_commit: START Fri Sep 6 13:04:05 UTC 2019
install_add_activate_commit: Adding PACKAGE

This operation requires a reload of the system. Do you want to proceed?
Please confirm you have changed boot config to flash:packages.conf [y/n]y

— Starting initial file syncing —
[1]: Copying flash:cat9k_iosxe.16.12.01.SPA.bin from chassis 1 to chassis 2
[2]: Finished copying to chassis 2
Info: Finished copying flash:cat9k_iosxe.16.12.01.SPA.bin to the selected chassis
Finished initial file syncing

— Starting Add —
Performing Add on all members
[1] Add package(s) on chassis 1
[1] Finished Add on chassis 1
[2] Add package(s) on chassis 2
[2] Finished Add on chassis 2
Checking status of Add on [1 2]
Add: Passed on [1 2]
Finished Add

install_add_activate_commit: Activating PACKAGE
Following packages shall be activated:
/flash/cat9k-wlc.16.12.01.SPA.pkg
/flash/cat9k-webui.16.12.01.SPA.pkg
/flash/cat9k-srdriver.16.12.01.SPA.pkg
/flash/cat9k-sipspa.16.12.01.SPA.pkg
/flash/cat9k-sipbase.16.12.01.SPA.pkg
/flash/cat9k-rpboot.16.12.01.SPA.pkg
/flash/cat9k-rpbase.16.12.01.SPA.pkg
/flash/cat9k-guestshell.16.12.01.SPA.pkg
/flash/cat9k-espbase.16.12.01.SPA.pkg
/flash/cat9k-cc_srdriver.16.12.01.SPA.pkg

This operation requires a reload of the system. Do you want to proceed? [y/n]y
— Starting Activate —
Performing Activate on all members
[1] Activate package(s) on chassis 1
[1] Finished Activate on chassis 1
[2] Activate package(s) on chassis 2
[2] Finished Activate on chassis 2
Checking status of Activate on [1 2]
Activate: Passed on [1 2]
Finished Activate

— Starting Commit —
Performing Commit on all members
[1] Commit package(s) on chassis 1
[1] Finished Commit on chassis 1
[2] Commit package(s) on chassis 2
[2] Finished Commit on chassis 2
Checking status of Commit on [1 2]
Commit: Passed on [1 2]
Finished Commit

Install will reload the system now!
SUCCESS: install_add_activate_commit Fri Sep 6 13:07:43 UTC 2019
SW-BBLAB#
*Sep 6 13:04:07.174: %INSTALL-5-INSTALL_START_INFO: Chassis 1 R0/0: install_engine: Started install one-shot flash:cat9k_iosxe.16.12.01.SPA.bin
*Sep 6 13:07:06.028: %INSTALL-5-INSTALL_AUTO_ABORT_TIMER_PROGRESS: Chassis 1 R0/0: rollback_timer: Install auto abort timer will expire in 7200 seconds
*Sep 6 13:07:06.482: %INSTALL-5-INSTALL_AUTO_ABORT_TIMER_PROGRESS: Chassis 2 R0/0: rollback_timer: Install auto abort timer will expire in 7200 seconds
SW-BBLAB#
Chassis 1 reloading, reason – Reload command

*Sep 6 13:07:44.015: %INSTALL-5-INSTALL_COMPLETED_INFO: Chassis 1 R0/0: install_engine: Completed install one-shot PACKAGE flash:cat9k_iosxe.16.12.01.SPA.bin
SW-BBLAB#
*Sep 6 13:07:45.858: %STACKMGR-1-RELOAD: Chassis 1 R0/0: stack_mgr: Reloading due to reason Reload command
SW-BBLAB#Sep 6 13:08:01.178: %PMANSep 6 13:08:01.199: %PSep 6 13:08:02.156: %PM

Initializing Hardware…

Initializing Hardware…

System Bootstrap, Version 16.9.1r [FC3], RELEASE SOFTWARE (P)
Compiled 21-05-2018 12:43:02.00 by rel

Current ROMMON image : Primary Rommon Image

Last reset cause:LocalSoft
C9500-48Y4C platform with 16777216 Kbytes of main memory

Preparing to autoboot. [Press Ctrl-C to interrupt] 5
boot: attempting to boot from [flash:packages.conf]
boot: reading file packages.conf
#

#

%IOSXEBOOT-4-BOOTLOADER_UPGRADE: (rp/0): ### Fri Sep 6 13:10:42 Universal 2019 PLEASE DO NOT POWER CYCLE ### BOOT LOADER (primary) UPGRADING

2019/09/06 13:10:59 ### FPGA (SB-GOLDEN) UPGRADING FROM REVISION 0x10 TO 0x23 PLEASE DO NOT POWER CYCLE ###

Waiting for remote chassis to join

2019/09/06 13:11:19 ### FPGA (SB-GOLDEN) UPGRADE DONE ###

2019/09/06 13:11:19 ### FPGA (SB-PRIMARY) UPGRADING FROM REVISION 0x10 TO 0x23 PLEASE DO NOT POWER CYCLE ###

%IOSXEBOOT-4-flashcp: (rp/0): polaris_cat9k_rommon_sb.bin

2019/09/06 13:11:39 ### FPGA (SB-PRIMARY) UPGRADE DONE ###

2019/09/06 13:11:39 ### FPGA UPGRADE DONE, DETECTED BOOTLOADER UPGRADE… ###

%IOSXEBOOT-4-BOOTLOADER_UPGRADE: (rp/0): boot loader upgrade successful

%IOSXEBOOT-4-BOOTLOADER_UPGRADE: (rp/0): Reloading to enable the New BOOTLOADER and FPGAd FPGA

Initializing Hardware…

Initializing Hardware……

System Bootstrap, Version 16.12.1[FC2], RELEASE SOFTWARE (P)
Compiled 18-04-2019 12:18:00.00 by rel

Current ROMMON image : Primary Rommon Image

Last reset cause:PowerOn
C9500-48Y4C platform with 16777216 Kbytes of main memory

Preparing to autoboot. [Press Ctrl-C to interrupt] 5
boot: attempting to boot from [flash:packages.conf]
boot: reading file packages.conf

Waiting for remote chassis to join

Chassis number is 1
All chassis in the stack have been discovered. Accelerating discovery

          Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software – Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

       Cisco Systems, Inc.
       170 West Tasman Drive
       San Jose, California 95134-1706

Cisco IOS Software [Gibraltar], Catalyst L3 Switch Software (CAT9K_IOSXE), Version 16.12.1, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2019 by Cisco Systems, Inc.
Compiled Tue 30-Jul-19 19:26 by mcpre

This software version supports only Smart Licensing as the software licensing mechanism.

PLEASE READ THE FOLLOWING TERMS CAREFULLY. INSTALLING THE LICENSE OR
LICENSE KEY PROVIDED FOR ANY CISCO SOFTWARE PRODUCT, PRODUCT FEATURE,
AND/OR SUBSEQUENTLY PROVIDED SOFTWARE FEATURES (COLLECTIVELY, THE
“SOFTWARE”), AND/OR USING SUCH SOFTWARE CONSTITUTES YOUR FULL
ACCEPTANCE OF THE FOLLOWING TERMS. YOU MUST NOT PROCEED FURTHER IF YOU
ARE NOT WILLING TO BE BOUND BY ALL THE TERMS SET FORTH HEREIN.

Your use of the Software is subject to the Cisco End User License Agreement
(EULA) and any relevant supplemental terms (SEULA) found at
http://www.cisco.com/c/en/us/about/legal/cloud-and-software/software-terms.html.

You hereby acknowledge and agree that certain Software and/or features are
licensed for a particular term, that the license to such Software and/or
features is valid only for the applicable term and that such Software and/or
features may be shut down or otherwise terminated by Cisco after expiration
of the applicable license term (e.g., 90-day trial period). Cisco reserves
the right to terminate any such Software feature electronically or by any
other means available. While Cisco may provide alerts, it is your sole
responsibility to monitor your usage of any such term Software feature to
ensure that your systems and networks are prepared for a shutdown of the
Software feature.

FIPS: Flash Key Check : Key Not Found, FIPS Mode Not Enabled

All TCP AO KDF Tests Pass

SECURE-SVL Mode Not Enabled
cisco C9500-48Y4C (X86) processor with 1868752K/6147K bytes of memory.
Processor board ID XXXXXXXXXXX
96 TwentyFive Gigabit Ethernet interfaces
8 Hundred Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
16010136K bytes of physical memory.
11161600K bytes of Bootflash at bootflash:.
11161600K bytes of Bootflash at bootflash-2:.
1638400K bytes of Crash Files at crashinfo:.
1638400K bytes of Crash Files at crashinfo-2:.
15854592K bytes of USB Flash at usbflash0:.
0K bytes of WebUI ODM Files at webui:.

Base Ethernet MAC Address : dc:8c:37:ee:d7:c0
Motherboard Assembly Number : 4873
Motherboard Serial Number : XXXXXXXXXXX
Model Revision Number : V02
Motherboard Revision Number : 4
Model Number : C9500-48Y4C
System Serial Number : XXXXXXXXXXX

Switch 02

Base Ethernet MAC Address : 78:bc:1a:0b:ca:80
Motherboard Assembly Number : 4873
Motherboard Serial Number : XXXXXXXXXXX
Model Revision Number : V02
Motherboard Revision Number : 4
Model Number : C9500-48Y4C
System Serial Number : XXXXXXXXXXX

Press RETURN to get started!

SW-BBLAB#show version
Cisco IOS XE Software, Version 16.12.01
Cisco IOS Software [Gibraltar], Catalyst L3 Switch Software (CAT9K_IOSXE), Version 16.12.1, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2019 by Cisco Systems, Inc.
Compiled Tue 30-Jul-19 19:26 by mcpre

Cisco IOS-XE software, Copyright (c) 2005-2019 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License (“GPL”) Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or “License Notice” file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.

ROM: IOS-XE ROMMON
BOOTLDR: System Bootstrap, Version 16.12.1[FC2], RELEASE SOFTWARE (P)

SW-BBLAB uptime is 4 minutes
Uptime for this control processor is 7 minutes
System returned to ROM by Image Install at 16:52:54 UTC Wed Aug 14 2019
System image file is “flash:packages.conf”
Last reload reason: Image Install

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Technology Package License Information:


Technology-package Technology-package

Current Type Next reboot

network-advantage Smart License network-advantage
dna-advantage Subscription Smart License dna-advantage
AIR License Level: AIR DNA Advantage
Next reload AIR license Level: AIR DNA Advantage

Smart Licensing Status: RESERVATION IN PROGRESS/EVAL MODE

cisco C9500-48Y4C (X86) processor with 1868752K/6147K bytes of memory.
Processor board ID XXXXXXXXXXX
3 Virtual Ethernet interfaces
96 TwentyFive Gigabit Ethernet interfaces
8 Hundred Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
16010136K bytes of physical memory.
11161600K bytes of Bootflash at bootflash:.
11161600K bytes of Bootflash at bootflash-2:.
1638400K bytes of Crash Files at crashinfo:.
1638400K bytes of Crash Files at crashinfo-2:.
15854592K bytes of USB Flash at usbflash0:.
0K bytes of WebUI ODM Files at webui:.

Base Ethernet MAC Address : dc:8c:37:ee:d7:c0
Motherboard Assembly Number : 4873
Motherboard Serial Number : XXXXXXXXXXX
Model Revision Number : V02
Motherboard Revision Number : 4
Model Number : C9500-48Y4C
System Serial Number : XXXXXXXXXXX

Switch 02

Base Ethernet MAC Address : 78:bc:1a:0b:ca:80
Motherboard Assembly Number : 4873
Motherboard Serial Number : XXXXXXXXXXX
Model Revision Number : V02
Motherboard Revision Number : 4
Model Number : C9500-48Y4C
System Serial Number : XXXXXXXXXXX

Configuration register is 0x102

SW-BBLAB#show redundancy

Redundant System Information :

   Available system uptime = 5 minutes

Switchovers system experienced = 0
Standby failures = 0
Last switchover reason = none

             Hardware Mode = Duplex
Configured Redundancy Mode = sso
 Operating Redundancy Mode = sso
          Maintenance Mode = Disabled
            Communications = Up

Current Processor Information :

           Active Location = slot 1
    Current Software state = ACTIVE
   Uptime in current state = 5 minutes
             Image Version = Cisco IOS Software [Gibraltar], Catalyst L3 Switch Software (CAT9K_IOSXE), Version 16.12.1, RELEASE SOFTWARE (fc4)

Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2019 by Cisco Systems, Inc.
Compiled Tue 30-Jul-19 19:26 by mcpre
BOOT = flash:packages.conf;
CONFIG_FILE =
Configuration register = 0x102

Peer Processor Information :

          Standby Location = slot 2
    Current Software state = STANDBY HOT 
   Uptime in current state = 2 minutes
             Image Version = Cisco IOS Software [Gibraltar], Catalyst L3 Switch Software (CAT9K_IOSXE), Version 16.12.1, RELEASE SOFTWARE (fc4)

Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2019 by Cisco Systems, Inc.
Compiled Tue 30-Jul-19 19:26 by mcpre
BOOT = flash:packages.conf;
CONFIG_FILE =
Configuration register = 0x102

SW-BBLAB#show stackwise-virtual dual-active-detection
In dual-active recovery mode: No
Recovery Reload: Enabled

Dual-Active-Detection Configuration:

Switch Dad port Status
—— ———— ———
1 TwentyFiveGigE1/0/2 up
TwentyFiveGigE1/0/48 up
2 TwentyFiveGigE2/0/2 up
TwentyFiveGigE2/0/48 up

SW-BBLAB#show stackwise-virtual link

Stackwise Virtual Link(SVL) Information:

Flags:

Link Status

U-Up D-Down

Protocol Status

S-Suspended P-Pending E-Error T-Timeout R-Ready

Switch SVL Ports Link-Status Protocol-Status
—— — —– ———– —————
1 1 TwentyFiveGigE1/0/1 U R
TwentyFiveGigE1/0/47 U R
2 1 TwentyFiveGigE2/0/1 U R
TwentyFiveGigE2/0/47 U R

SW-BBLAB#show switch
Switch/Stack Mac Address : dc8c.37ee.d7c0 – Local Mac Address
Mac persistency wait time: Indefinite
H/W Current

Switch# Role Mac Address Priority Version State

*1 Active dc8c.37ee.d7c0 15 V02 Ready
2 Standby 78bc.1a0b.ca80 14 V02 Ready

SW-BBLAB#dir
Directory of bootflash:/

32450 drwx 4096 Apr 16 2019 06:26:10 +00:00 .dbpersist
32455 -rw- 700524979 Apr 16 2019 06:27:29 +00:00 cat9k_iosxe.16.09.02.SPA.bin
81121 drwx 4096 Sep 6 2019 13:14:21 +00:00 .installer
32456 -rw- 592 Sep 6 2019 13:14:23 +00:00 bootloader_evt_handle.log
81122 drwx 4096 Apr 16 2019 06:33:56 +00:00 .ssh
81130 drwx 4096 Apr 16 2019 06:34:07 +00:00 core
89233 drwx 4096 Sep 6 2019 13:17:31 +00:00 .prst_sync
105457 drwx 4096 Sep 6 2019 13:07:10 +00:00 .rollback_timer
113569 drwx 4096 Apr 16 2019 06:34:08 +00:00 gs_script
121681 drwx 4096 Sep 6 2019 13:10:41 +00:00 tech_support
129793 drwx 4096 Sep 6 2019 13:14:39 +00:00 dc_profile_dir
32457 -rw- 398 Sep 6 2019 13:14:40 +00:00 boothelper.log
32458 -rw- 132108 Sep 6 2019 13:14:59 +00:00 memleak.tcl
137905 drwx 4096 Apr 16 2019 06:34:46 +00:00 onep
32459 -rw- 1696 Sep 6 2019 13:17:36 +00:00 vlan.dat
32460 -rw- 810207530 Sep 6 2019 12:43:48 +00:00 cat9k_iosxe.16.12.01.SPA.bin
32462 -rwx 1953 Sep 6 2019 13:14:59 +00:00 svl_ipc.tcl
137914 -rw- 14222344 Sep 6 2019 13:05:07 +00:00 cat9k-cc_srdriver.16.12.01.SPA.pkg
137915 -rw- 88892420 Sep 6 2019 13:05:07 +00:00 cat9k-espbase.16.12.01.SPA.pkg
137916 -rw- 1684484 Sep 6 2019 13:05:07 +00:00 cat9k-guestshell.16.12.01.SPA.pkg
137917 -rw- 535475200 Sep 6 2019 13:05:08 +00:00 cat9k-rpbase.16.12.01.SPA.pkg
137923 -rw- 43111714 Sep 6 2019 13:05:27 +00:00 cat9k-rpboot.16.12.01.SPA.pkg
137918 -rw- 31425540 Sep 6 2019 13:05:08 +00:00 cat9k-sipbase.16.12.01.SPA.pkg
137919 -rw- 60183552 Sep 6 2019 13:05:08 +00:00 cat9k-sipspa.16.12.01.SPA.pkg
137920 -rw- 22676484 Sep 6 2019 13:05:08 +00:00 cat9k-srdriver.16.12.01.SPA.pkg
137921 -rw- 12854272 Sep 6 2019 13:05:08 +00:00 cat9k-webui.16.12.01.SPA.pkg
137922 -rw- 9216 Sep 6 2019 13:05:08 +00:00 cat9k-wlc.16.12.01.SPA.pkg
137913 -rw- 7559 Sep 6 2019 13:05:27 +00:00 packages.conf
32461 -rw- 816 Sep 6 2019 13:11:40 +00:00 boothelper.log.old
129800 drwx 4096 Sep 6 2019 13:16:08 +00:00 callhome
32463 -rw- 0 Sep 6 2019 13:17:31 +00:00 rdope_out.txt
32464 -rw- 91 Sep 6 2019 13:17:46 +00:00 rdope.log

11250098176 bytes total (8256241664 bytes free)

SW-BBLAB#install add file usbflash0:cat9k_iosxe.16.12.01c.SPA.bin activate issu commit
install_add_activate_commit: START Fri Sep 6 13:25:39 UTC 2019
Copying usbflash0:cat9k_iosxe.16.12.01c.SPA.bin to flash:cat9k_iosxe.16.12.01c.SPA.bin
install_add_activate_commit: Adding ISSU
install_add_activate_commit: Checking whether new add is allowed ….

— Starting initial file syncing —
[1]: Copying flash:cat9k_iosxe.16.12.01c.SPA.bin from chassis 1 to chassis 2
[2]: Finished copying to chassis 2
Info: Finished copying flash:cat9k_iosxe.16.12.01c.SPA.bin to the selected chassis
Finished initial file syncing

— Starting Add —
Performing Add on all members
[1] Add package(s) on chassis 1
[1] Finished Add on chassis 1
[2] Add package(s) on chassis 2
[2] Finished Add on chassis 2
Checking status of Add on [1 2]
Add: Passed on [1 2]
Finished Add

install_add_activate_commit: Activating ISSU

NOTE: Going to start Oneshot ISSU install process

STAGE 0: System Level Sanity Check

— Verifying install_issu supported —
— Verifying standby is in Standby Hot state —
— Verifying booted from the valid media —
— Verifying AutoBoot mode is enabled —
— Verifying Platform specific ISSU admission criteria —
Finished Initial System Level Sanity Check

STAGE 1: Installing software on Standby

— Starting install_remote —
Performing install_remote on Chassis remote
[2] install_remote package(s) on chassis 2
[2] Finished install_remote on chassis 2
install_remote: Passed on [2]
Finished install_remote

STAGE 2: Restarting Standby

— Starting standby reload —
Finished standby reload

— Starting wait for Standby to reach terminal redundancy state —

*Sep 6 13:33:03.280: %REDUNDANCY-3-STANDBY_LOST: Standby processor fault (PEER_NOT_PRESENT)
*Sep 6 13:33:03.280: %REDUNDANCY-3-STANDBY_LOST: Standby processor fault (PEER_DOWN)
*Sep 6 13:33:03.280: %REDUNDANCY-3-STANDBY_LOST: Standby processor fault (PEER_REDUNDANCY_STATE_CHANGE)
*Sep 6 13:33:03.281: %STACKMGR-1-DUAL_ACTIVE_CFG_MSG: Chassis 1 R0/0: stack_mgr: Dual Active Detection links are not available anymore
*Sep 6 13:33:05.255: %LINK-3-UPDOWN: Interface TwentyFiveGigE1/0/1, changed state to down
*Sep 6 13:33:05.263: %LINK-3-UPDOWN: Interface TwentyFiveGigE1/0/2, changed state to down
*Sep 6 13:33:05.266: %LINK-3-UPDOWN: Interface TwentyFiveGigE1/0/47, changed state to down
*Sep 6 13:33:05.271: %LINK-3-UPDOWN: Interface TwentyFiveGigE1/0/48, changed state to down
*Sep 6 13:33:05.397: %LINK-3-UPDOWN: Interface TwentyFiveGigE2/0/1, changed state to down
*Sep 6 13:33:05.397: %LINK-3-UPDOWN: Interface TwentyFiveGigE2/0/2, changed state to down
*Sep 6 13:33:05.399: %LINK-3-UPDOWN: Interface TwentyFiveGigE2/0/5, changed state to down
*Sep 6 13:33:05.399: %LINK-3-UPDOWN: Interface TwentyFiveGigE2/0/6, changed state to down
*Sep 6 13:33:05.400: %LINK-3-UPDOWN: Interface TwentyFiveGigE2/0/7, changed state to down
*Sep 6 13:33:05.401: %LINK-3-UPDOWN: Interface TwentyFiveGigE2/0/47, changed state to down
*Sep 6 13:33:05.401: %LINK-3-UPDOWN: Interface TwentyFiveGigE2/0/48, changed state to down
*Sep 6 13:33:05.403: %LINK-3-UPDOWN: Interface HundredGigE2/0/49, changed state to down
*Sep 6 13:33:05.403: %LINK-3-UPDOWN: Interface HundredGigE2/0/50, changed state to down
*Sep 6 13:33:05.403: %LINK-3-UPDOWN: Interface HundredGigE2/0/51, changed state to down
*Sep 6 13:33:05.403: %LINK-3-UPDOWN: Interface HundredGigE2/0/52, changed state to down
*Sep 6 13:37:10.132: %STACKMGR-1-DUAL_ACTIVE_CFG_MSG: Chassis 1 R0/0: stack_mgr: Dual Active Detection link is available now
*Sep 6 13:37:12.130: %LINK-3-UPDOWN: Interface TwentyFiveGigE1/0/2, changed state to up
*Sep 6 13:37:16.570: %LINK-3-UPDOWN: Interface TwentyFiveGigE1/0/1, changed state to up
*Sep 6 13:37:16.578: %LINK-3-UPDOWN: Interface TwentyFiveGigE1/0/48, changed state to up
*Sep 6 13:37:18.012: %LINK-3-UPDOWN: Interface TwentyFiveGigE1/0/47, changed state to up
*Sep 6 13:37:09.120: %STACKMGR-1-DUAL_ACTIVE_CFG_MSG: Chassis 2 R0/0: stack_mgr: Dual Active Detection link is available now
*Sep 6 13:37:45.512: %IOSXE_PEM-3-PEMFAIL: The PEM in Chassis 2 slot P1 is switched off or encountering a failure condition.
*Sep 6 13:38:36.451: %SELINUX-3-MISMATCH: Chassis 1 R0/0: audispd: type=AVC msg=audit(1567777116.449:103): avc: denied { write } for pid=5883 comm=”linux_iosd-imag” name=”10.130.1.0″ dev=”tmpfs” ino=140366 scontext=system_u:system_r:polaris_iosd_t:s0 tcontext=system_u:object_r:polaris_ncd_tmp_t:s0 tclass=dir permissive=1
*Sep 6 13:38:36.451: %SELINUX-3-MISMATCH: Chassis 1 R0/0: audispd: type=AVC msg=audit(1567777116.449:103): avc: denied { add_name } for pid=5883 comm=”linux_iosd-imag” name=”sanosync.data.readLock” scontext=system_u:system_r:polaris_iosd_t:s0 tcontext=system_u:object_r:polaris_ncd_tmp_t:s0 tclass=dir permissive=1
*Sep 6 13:38:36.451: %SELINUX-3-MISMATCH: Chassis 1 R0/0: audispd: type=AVC msg=audit(1567777116.449:103): avc: denied { create } for pid=5883 comm=”linux_iosd-imag” name=”sanosync.data.readLock” scontext=system_u:system_r:polaris_iosd_t:s0 tcontext=system_u:object_r:polaris_ncd_tmp_t:s0 tclass=file permissive=1
*Sep 6 13:38:36.451: %SELINUX-3-MISMATCH: Chassis 1 R0/0: audispd: type=AVC msg=audit(1567777116.449:103): avc: denied { write } for pid=5883 comm=”linux_iosd-imag” path=”/tmp/ufs/lic0/10.130.1.0/sanosync.data.readLock” dev=”tmpfs” ino=137938 scontext=system_u:system_r:polaris_iosd_t:s0 tcontext=system_u:object_r:polaris_ncd_tmp_t:s0 tclass=file permissive=1
*Sep 6 13:38:36.458: %SELINUX-3-MISMATCH: Chassis 1 R0/0: audispd: type=AVC msg=audit(1567777116.457:104): avc: denied { remove_name } for pid=5883 comm=”linux_iosd-imag” name=”sanosync.data.readLock” dev=”tmpfs” ino=137938 scontext=system_u:system_r:polaris_iosd_t:s0 tcontext=system_u:object_r:polaris_ncd_tmp_t:s0 tclass=dir permissive=1
*Sep 6 13:38:36.458: %SELINUX-3-MISMATCH: Chassis 1 R0/0: audispd: type=AVC msg=audit(1567777116.457:104): avc: denied { unlink } for pid=5883 comm=”linux_iosd-imag” name=”sanosync.data.readLock” dev=”tmpfs” ino=137938 scontext=system_u:system_r:polaris_iosd_t:s0 tcontext=system_u:object_r:polaris_ncd_tmp_t:s0 tclass=file permissive=1
*Sep 6 13:38:45.765: %REDUNDANCY-3-IPC: IOS versions do not match.

*Sep 6 13:38:46.180: %IFS-3-FSDUP: Failed to add stby-bootflash, filesystem prefix exists
-Traceback= 1#1350f061a78508b993d0b9e25bd0eecc :560E9A5AD000+807A4A4 :560E9A5AD000+5F469CB :560E9A5AD000+5F05BBE :560E9A5AD000+5EFFF4D :560E9A5AD000+B5F03A1 :560E9A5AD000+5EFEBEB :560E9A5AD000+5EFE977 :560E9A5AD000+5EFE5EF
*Sep 6 13:38:46.182: %IFS-3-FSDUP: Failed to add stby-obfl, filesystem prefix exists
-Traceback= 1#1350f061a78508b993d0b9e25bd0eecc :560E9A5AD000+807A4A4 :560E9A5AD000+5F46AD3 :560E9A5AD000+5F05BBE :560E9A5AD000+5EFFF4D :560E9A5AD000+B5F03A1 :560E9A5AD000+5EFEBEB :560E9A5AD000+5EFE977 :560E9A5AD000+5EFE5EF
*Sep 6 13:38:46.183: %IFS-3-FSDUP: Failed to add stby-crashinfo, filesystem prefix exists
-Traceback= 1#1350f061a78508b993d0b9e25bd0eecc :560E9A5AD000+807A4A4 :560E9A5AD000+5F46CB5 :560E9A5AD000+5F05BBE :560E9A5AD000+5EFFF4D :560E9A5AD000+B5F03A1 :560E9A5AD000+5EFEBEB :560E9A5AD000+5EFE977 :560E9A5AD000+5EFE5EF
*Sep 6 13:38:46.185: %IFS-3-FSDUP: Failed to add stby-lic0, filesystem prefix exists
-Traceback= 1#1350f061a78508b993d0b9e25bd0eecc :560E9A5AD000+807A4A4 :560E9A5AD000+5F46EA1 :560E9A5AD000+5F05BBE :560E9A5AD000+5EFFF4D :560E9A5AD000+B5F03A1 :560E9A5AD000+5EFEBEB :560E9A5AD000+5EFE977 :560E9A5AD000+5EFE5EF
*Sep 6 13:38:50.103: %CMEM-3-SENSOR_INIT_FAILED: Chassis 2 R0/0: cmand: Sensor (3570MB1_0: VOUT) initialization failed due to No such file or directory.
*Sep 6 13:39:07.872: %LINK-3-UPDOWN: Interface TwentyFiveGigE2/0/1, changed state to up
*Sep 6 13:39:07.877: %LINK-3-UPDOWN: Interface TwentyFiveGigE2/0/2, changed state to up
*Sep 6 13:39:07.885: %LINK-3-UPDOWN: Interface TwentyFiveGigE2/0/47, changed state to up
*Sep 6 13:39:07.888: %LINK-3-UPDOWN: Interface TwentyFiveGigE2/0/48, changed state to up
*Sep 6 13:39:09.090: %LINK-3-UPDOWN: Interface TwentyFiveGigE2/0/5, changed state to upFinished wait for Standby to reach terminal redundancy state

STAGE 3: Installing software on Active

— Starting install_active —
Performing install_active on Chassis 1
[1] install_active package(s) on chassis 1
[1] Finished install_active on chassis 1
install_active: Passed on [1]
Finished install_active

STAGE 4: Restarting Active (switchover to standby)

— Starting active reload —
New software will load after reboot process is completed
SUCCESS: install_add_activate_commit Fri Sep 6 13:43:05 UTC 2019

SW-BBLAB#
*Sep 6 13:25:40.990: %INSTALL-5-INSTALL_START_INFO: Chassis 1 R0/0: install_engine: Started install one-shot ISSU usbflash0:cat9k_iosxe.16.12.01c.SPA.bin
*Sep 6 13:33:03.393: %IOSXE_OIR-6-REMCARD: Card (cc) removed from chassis 2 slot 1
*Sep 6 13:33:03.396: %IOSXE_OIR-6-REMSPA: SPA removed from chassis 2 subslot 1/0, interfaces disabled
*Sep 6 13:33:03.408: %SPA_OIR-6-OFFLINECARD: SPA (C9500-48Y4C) offline in chassis 2 subslot 1/0
*Sep 6 13:33:03.436: %IOSXE_PEM-6-REMPEM_FM: PEM/FM chassis 2 slot P0 removed
*Sep 6 13:33:03.436: %IOSXE_PEM-6-REMPEM_FM: PEM/FM chassis 2 slot P1 removed
*Sep 6 13:33:03.436: %IOSXE_PEM-6-REMPEM_FM: PEM/FM chassis 2 slot P2 removed
*Sep 6 13:33:03.437: %IOSXE_PEM-6-REMPEM_FM: PEM/FM chassis 2 slot P3 removed
*Sep 6 13:33:03.255: %NIF_MGR-6-PORT_LINK_DOWN: Chassis 1 R0/0: nif_mgr: TwentyFiveGigabitEthernet Port 1 on front side stack link 0 is DOWN.
*Sep 6 13:33:03.255: %NIF_MGR-6-PORT_CONN_DISCONNECTED: Chassis 1 R0/0: nif_mgr: TwentyFiveGigabitEthernet Port 1 on front side stack link 0 connection has DISCONNECTED: CONN_ERR_PORT_LINK_DOWN_EVENT
*Sep 6 13:33:03.262: %NIF_MGR-6-STACK_LINK_DOWN: Chassis 1 R0/0: nif_mgr: Front side stack link 0 is DOWN.
*Sep 6 13:33:03.265: %STACKMGR-6-STACK_LINK_CHANGE: Chassis 1 R0/0: stack_mgr: Stack port 1 on Chassis 1 is down
*Sep 6 13:33:04.255: %LINEPROTO-5-UPDOWN: Line protocol on Interface TwentyFiveGigE1/0/1, changed state to down
*Sep 6 13:33:04.262: %LINEPROTO-5-UPDOWN: Line protocol on Interface TwentyFiveGigE1/0/2, changed state to down
*Sep 6 13:33:04.264: %LINEPROTO-5-UPDOWN: Line protocol on Interface TwentyFiveGigE1/0/47, changed state to down
*Sep 6 13:33:04.269: %LINEPROTO-5-UPDOWN: Line protocol on Interface TwentyFiveGigE1/0/48, changed state to down
*Sep 6 13:33:05.276: %RF-5-RF_RELOAD: Peer reload. Reason: EHSA standby down
*Sep 6 13:33:05.283: %IOSXE_REDUNDANCY-6-PEER_LOST: Active detected switch 2 is no longer standby
*Sep 6 13:33:05.291: %SMART_LIC-5-EVAL_START: Entering evaluation period
*Sep 6 13:33:05.292: %SMART_LIC-5-EVAL_START: Entering evaluation period
*Sep 6 13:33:06.398: %LINEPROTO-5-UPDOWN: Line protocol on Interface TwentyFiveGigE2/0/1, changed state to down
*Sep 6 13:33:06.398: %LINEPROTO-5-UPDOWN: Line protocol on Interface TwentyFiveGigE2/0/2, changed state to down
*Sep 6 13:33:06.400: %LINEPROTO-5-UPDOWN: Line protocol on Interface TwentyFiveGigE2/0/5, changed state to down
*Sep 6 13:33:06.400: %LINEPROTO-5-UPDOWN: Line protocol on Interface TwentyFiveGigE2/0/47, changed state to down
*Sep 6 13:33:06.401: %LINEPROTO-5-UPDOWN: Line protocol on Interface TwentyFiveGigE2/0/48, changed state to down
*Sep 6 13:37:13.129: %LINEPROTO-5-UPDOWN: Line protocol on Interface TwentyFiveGigE1/0/2, changed state to up
*Sep 6 13:37:14.572: %NIF_MGR-6-PORT_LINK_UP: Chassis 1 R0/0: nif_mgr: TwentyFiveGigabitEthernet Port 1 on front side stack link 0 is UP.
*Sep 6 13:37:14.572: %NIF_MGR-6-PORT_CONN_PENDING: Chassis 1 R0/0: nif_mgr: TwentyFiveGigabitEthernet Port 1 on front side stack link 0 connection is PENDING.
*Sep 6 13:37:16.014: %NIF_MGR-6-PORT_LINK_UP: Chassis 1 R0/0: nif_mgr: TwentyFiveGigabitEthernet Port 47 on front side stack link 0 is UP.
*Sep 6 13:37:16.014: %NIF_MGR-6-PORT_CONN_PENDING: Chassis 1 R0/0: nif_mgr: TwentyFiveGigabitEthernet Port 47 on front side stack link 0 connection is PENDING.
*Sep 6 13:37:17.570: %LINEPROTO-5-UPDOWN: Line protocol on Interface TwentyFiveGigE1/0/1, changed state to up
*Sep 6 13:37:17.579: %LINEPROTO-5-UPDOWN: Line protocol on Interface TwentyFiveGigE1/0/48, changed state to up
*Sep 6 13:37:18.254: %NIF_MGR-6-PORT_CONNECTION_STATUS_CHANGE: Chassis 1 R0/0: nif_mgr: PORT:TwentyFiveGigabitEthernet Port 1 changed state from Pending to Ready.
*Sep 6 13:37:18.254: %NIF_MGR-6-PORT_CONN_READY: Chassis 1 R0/0: nif_mgr: TwentyFiveGigabitEthernet Port 1 on front side stack link 0 connection is READY.
*Sep 6 13:37:18.255: %NIF_MGR-6-STACK_LINK_UP: Chassis 1 R0/0: nif_mgr: Front side stack link 0 is UP.
*Sep 6 13:37:18.257: %STACKMGR-6-STACK_LINK_CHANGE: Chassis 1 R0/0: stack_mgr: Stack port 1 on Chassis 1 is up
*Sep 6 13:37:19.013: %LINEPROTO-5-UPDOWN: Line protocol on Interface TwentyFiveGigE1/0/47, changed state to up
*Sep 6 13:37:21.255: %NIF_MGR-6-PORT_CONNECTION_STATUS_CHANGE: Chassis 1 R0/0: nif_mgr: PORT:TwentyFiveGigabitEthernet Port 47 changed state from Pending to Ready.
*Sep 6 13:37:21.255: %NIF_MGR-6-PORT_CONN_READY: Chassis 1 R0/0: nif_mgr: TwentyFiveGigabitEthernet Port 47 on front side stack link 0 connection is READY.
*Sep 6 13:37:23.268: %STACKMGR-6-CHASSIS_ADDED: Chassis 1 R0/0: stack_mgr: Chassis 2 has been added to the stack.
*Sep 6 13:36:42.707: %STACKMGR-6-STACK_LINK_CHANGE: Chassis 2 R0/0: stack_mgr: Stack port 2 on Chassis 2 is nocable
*Sep 6 13:36:42.707: %STACKMGR-6-STACK_LINK_CHANGE: Chassis 2 R0/0: stack_mgr: Stack port 1 on Chassis 2 is down
*Sep 6 13:37:13.773: %NIF_MGR-6-PORT_LINK_UP: Chassis 2 R0/0: nif_mgr: TwentyFiveGigabitEthernet Port 1 on front side stack link 0 is UP.
*Sep 6 13:37:13.773: %NIF_MGR-6-PORT_CONN_PENDING: Chassis 2 R0/0: nif_mgr: TwentyFiveGigabitEthernet Port 1 on front side stack link 0 connection is PENDING.
*Sep 6 13:37:15.216: %NIF_MGR-6-PORT_LINK_UP: Chassis 2 R0/0: nif_mgr: TwentyFiveGigabitEthernet Port 47 on front side stack link 0 is UP.
*Sep 6 13:37:15.216: %NIF_MGR-6-PORT_CONN_PENDING: Chassis 2 R0/0: nif_mgr: TwentyFiveGigabitEthernet Port 47 on front side stack link 0 connection is PENDING.
*Sep 6 13:37:18.709: %NIF_MGR-6-PORT_CONNECTION_STATUS_CHANGE: Chassis 2 R0/0: nif_mgr: PORT:TwentyFiveGigabitEthernet Port 1 changed state from Pending to Ready.
*Sep 6 13:37:18.709: %NIF_MGR-6-PORT_CONN_READY: Chassis 2 R0/0: nif_mgr: TwentyFiveGigabitEthernet Port 1 on front side stack link 0 connection is READY.
*Sep 6 13:37:18.709: %NIF_MGR-6-STACK_LINK_UP: Chassis 2 R0/0: nif_mgr: Front side stack link 0 is UP.
*Sep 6 13:37:18.709: %STACKMGR-6-STACK_LINK_CHANGE: Chassis 2 R0/0: stack_mgr: Stack port 1 on Chassis 2 is up
*Sep 6 13:37:22.534: %STACKMGR-6-CHASSIS_ADDED: Chassis 2 R0/0: stack_mgr: Chassis 2 has been added to the stack.
*Sep 6 13:37:23.967: %STACKMGR-6-CHASSIS_ADDED: Chassis 2 R0/0: stack_mgr: Chassis 2 has been added to the stack.
*Sep 6 13:37:24.704: %STACKMGR-6-CHASSIS_ADDED: Chassis 1 R0/0: stack_mgr: Chassis 2 has been added to the stack.
*Sep 6 13:37:45.290: %IOSXE_OIR-6-INSCARD: Card (cc) inserted in chassis 2 slot 1
*Sep 6 13:37:45.341: %IOSXE_OIR-6-ONLINECARD: Card (cc) online in chassis 2 slot 1
*Sep 6 13:37:45.341: %IOSXE_OIR-6-INSSPA: SPA inserted in chassis 2 subslot 1/0
*Sep 6 13:37:45.347: %IOSXE_OIR-6-ONLINECARD: Card (fp) online in chassis 2 slot F0
*Sep 6 13:37:45.511: %IOSXE_PEM-6-INSPEM_FM: PEM/FM chassis 2 slot P0 inserted
*Sep 6 13:37:45.511: %IOSXE_PEM-6-PEMOK: The PEM in Chassis 2 slot P0 is functioning properly
*Sep 6 13:37:45.512: %IOSXE_PEM-6-INSPEM_FM: PEM/FM chassis 2 slot P1 inserted
*Sep 6 13:37:45.513: %IOSXE_PEM-6-INSPEM_FM: PEM/FM chassis 2 slot P2 inserted
*Sep 6 13:37:45.513: %IOSXE_PEM-6-PEMOK: The PEM in Chassis 2 slot P2 is functioning properly
*Sep 6 13:37:45.513: %IOSXE_PEM-6-INSPEM_FM: PEM/FM chassis 2 slot P3 inserted
*Sep 6 13:37:45.514: %IOSXE_PEM-6-PEMOK: The PEM in Chassis 2 slot P3 is functioning properly
*Sep 6 13:38:20.391: %IOSXE_REDUNDANCY-6-PEER: Active detected switch 2 as standby.
*Sep 6 13:38:20.389: %STACKMGR-6-STANDBY_ELECTED: Chassis 1 R0/0: stack_mgr: Chassis 2 has been elected STANDBY.
*Sep 6 13:38:36.502: %SMART_LIC-5-EVAL_START: Entering evaluation period
*Sep 6 13:38:36.505: %SMART_LIC-5-EVAL_START: Entering evaluation period
*Sep 6 13:38:45.379: %REDUNDANCY-5-PEER_MONITOR_EVENT: Active detected a standby insertion (raw-event=PEER_FOUND(4))

*Sep 6 13:38:45.379: %REDUNDANCY-5-PEER_MONITOR_EVENT: Active detected a standby insertion (raw-event=PEER_REDUNDANCY_STATE_CHANGE(5))

*Sep 6 13:38:46.989: Port inserted f
Chassis 1 reloading, reason – Reload command
Sep 6 13:43:16.528: %PMAN-5-EXITACTION: F0/0: pvp: Process manager is exiting: reload fru action requested
Sep 6 13:43:16.528: %PMAN-5-EXITACTION: C1/0: pvp: Process manager is exiting: reload fru action requested
Sep 6 13:43:17.413: %PMAN-5-EXITACTION: R0/0: pvp: Process manager is exiting: reload fru action requested

Initializing Hardware…

Initializing Hardware……

System Bootstrap, Version 16.12.1[FC2], RELEASE SOFTWARE (P)
Compiled 18-04-2019 12:18:00.00 by rel

Current ROMMON image : Primary Rommon Image

Last reset cause:LocalSoft
C9500-48Y4C platform with 16777216 Kbytes of main memory

Preparing to autoboot. [Press Ctrl-C to interrupt] 5
boot: attempting to boot from [flash:packages.conf]
boot: reading file packages.conf
#

#

Waiting for remote chassis to join

#

Chassis number is 1
All chassis in the stack have been discovered. Accelerating discovery

          Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software – Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

       Cisco Systems, Inc.
       170 West Tasman Drive
       San Jose, California 95134-1706

Cisco IOS Software [Gibraltar], Catalyst L3 Switch Software (CAT9K_IOSXE), Version 16.12.1c, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2019 by Cisco Systems, Inc.
Compiled Mon 26-Aug-19 17:30 by mcpre

This software version supports only Smart Licensing as the software licensing mechanism.

PLEASE READ THE FOLLOWING TERMS CAREFULLY. INSTALLING THE LICENSE OR
LICENSE KEY PROVIDED FOR ANY CISCO SOFTWARE PRODUCT, PRODUCT FEATURE,
AND/OR SUBSEQUENTLY PROVIDED SOFTWARE FEATURES (COLLECTIVELY, THE
“SOFTWARE”), AND/OR USING SUCH SOFTWARE CONSTITUTES YOUR FULL
ACCEPTANCE OF THE FOLLOWING TERMS. YOU MUST NOT PROCEED FURTHER IF YOU
ARE NOT WILLING TO BE BOUND BY ALL THE TERMS SET FORTH HEREIN.

Your use of the Software is subject to the Cisco End User License Agreement
(EULA) and any relevant supplemental terms (SEULA) found at
http://www.cisco.com/c/en/us/about/legal/cloud-and-software/software-terms.html.

You hereby acknowledge and agree that certain Software and/or features are
licensed for a particular term, that the license to such Software and/or
features is valid only for the applicable term and that such Software and/or
features may be shut down or otherwise terminated by Cisco after expiration
of the applicable license term (e.g., 90-day trial period). Cisco reserves
the right to terminate any such Software feature electronically or by any
other means available. While Cisco may provide alerts, it is your sole
responsibility to monitor your usage of any such term Software feature to
ensure that your systems and networks are prepared for a shutdown of the
Software feature.

FIPS key on Standby is not configured.
If Active is FIPS configured, please make sure to configure FIPS on Standby also.
Else switch is in non-standard operating mode.

All TCP AO KDF Tests Pass

SECURE-SVL key on Standby is not configured.
If Active is SECURE-SVL configured, please make
sure to configure SECURE-SVL on Standby also.
Else switch is in non-standard operating mode.
cisco C9500-48Y4C (X86) processor with 1868748K/6147K bytes of memory.
Processor board ID XXXXXXXXXXX
0 Virtual Ethernet interface
0 Hundred Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
16010136K bytes of physical memory.
11161600K bytes of Bootflash at bootflash:.
11161600K bytes of Bootflash at bootflash-2:.
1638400K bytes of Crash Files at crashinfo:.
1638400K bytes of Crash Files at crashinfo-2:.
15854592K bytes of USB Flash at usbflash0:.
0K bytes of WebUI ODM Files at webui:.

Base Ethernet MAC Address : 78:bc:1a:0b:ca:80
Motherboard Assembly Number : 4873
Motherboard Serial Number : XXXXXXXXXXX
Model Revision Number : V02
Motherboard Revision Number : 4
Model Number : C9500-48Y4C
System Serial Number : XXXXXXXXXXX

Switch 01

Base Ethernet MAC Address : dc:8c:37:ee:d7:c0
Motherboard Assembly Number : 4873
Motherboard Serial Number : XXXXXXXXXXX
Model Revision Number : V02
Motherboard Revision Number : 4
Model Number : C9500-48Y4C
System Serial Number : XXXXXXXXXXX

Press RETURN to get started!

SW-BBLAB#show red
SW-BBLAB#show redundancy

Redundant System Information :

   Available system uptime = 59 minutes

Switchovers system experienced = 2
Standby failures = 0
Last switchover reason = user forced

             Hardware Mode = Simplex
Configured Redundancy Mode = sso
 Operating Redundancy Mode = Non-redundant
          Maintenance Mode = Disabled
            Communications = Down      Reason: Failure

Current Processor Information :

           Active Location = slot 1
    Current Software state = ACTIVE
   Uptime in current state = 0 minutes
             Image Version = Cisco IOS Software [Gibraltar], Catalyst L3 Switch Software (CAT9K_IOSXE), Version 16.12.1c, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2019 by Cisco Systems, Inc.
Compiled Mon 26-Aug-19 17:30 by mcpre
BOOT = flash:packages.conf;
CONFIG_FILE =
Configuration register = 0x102

Peer (slot: 0) information is not available because it is in ‘DISABLED’ state

*Sep 6 14:20:18.942: %STACKMGR-1-DUAL_ACTIVE_CFG_MSG: Chassis 1 R0/0: stack_mgr: Dual Active Detection link is available now
*Sep 6 14:20:20.939: %LINK-3-UPDOWN: Interface TwentyFiveGigE1/0/2, changed state to up
*Sep 6 14:20:21.938: %LINEPROTO-5-UPDOWN: Line protocol on Interface TwentyFiveGigE1/0/2, changed state to up
*Sep 6 14:20:23.539: %NIF_MGR-6-PORT_LINK_UP: Chassis 1 R0/0: nif_mgr: TwentyFiveGigabitEthernet Port 1 on front side stack link 0 is UP.
*Sep 6 14:20:23.539: %NIF_MGR-6-PORT_CONN_PENDING: Chassis 1 R0/0: nif_mgr: TwentyFiveGigabitEthernet Port 1 on front side stack link 0 connection is PENDING.
*Sep 6 14:20:24.863: %NIF_MGR-6-PORT_LINK_UP: Chassis 1 R0/0: nif_mgr: TwentyFiveGigabitEthernet Port 47 on front side stack link 0 is UP.
*Sep 6 14:20:24.863: %NIF_MGR-6-PORT_CONN_PENDING: Chassis 1 R0/0: nif_mgr: TwentyFiveGigabitEthernet Port 47 on front side stack link 0 connection is PENDING.
*Sep 6 14:20:25.538: %LINK-3-UPDOWN: Interface TwentyFiveGigE1/0/1, changed state to up
*Sep 6 14:20:25.663: %LINK-3-UPDOWN: Interface TwentyFiveGigE1/0/48, changed state to up
*Sep 6 14:20:26.538: %LINEPROTO-5-UPDOWN: Line protocol on Interface TwentyFiveGigE1/0/1, changed state to up
*Sep 6 14:20:26.662: %LINEPROTO-5-UPDOWN: Line protocol on Interface TwentyFiveGigE1/0/48, changed state to up
*Sep 6 14:20:26.862: %LINK-3-UPDOWN: Interface TwentyFiveGigE1/0/47, changed state to up
*Sep 6 14:20:27.861: %LINEPROTO-5-UPDOWN: Line protocol on Interface TwentyFiveGigE1/0/47, changed state to up
*Sep 6 14:20:28.900: %NIF_MGR-6-PORT_CONNECTION_STATUS_CHANGE: Chassis 1 R0/0: nif_mgr: PORT:TwentyFiveGigabitEthernet Port 1 changed state from Pending to Ready.
*Sep 6 14:20:28.900: %NIF_MGR-6-PORT_CONN_READY: Chassis 1 R0/0: nif_mgr: TwentyFiveGigabitEthernet Port 1 on front side stack link 0 connection is READY.
*Sep 6 14:20:28.900: %NIF_MGR-6-STACK_LINK_UP: Chassis 1 R0/0: nif_mgr: Front side stack link 0 is UP.
*Sep 6 14:20:28.902: %STACKMGR-6-STACK_LINK_CHANGE: Chassis 1 R0/0: stack_mgr: Stack port 1 on Chassis 1 is up
*Sep 6 14:20:33.546: %STACKMGR-6-CHASSIS_ADDED: Chassis 1 R0/0: stack_mgr: Chassis 2 has been added to the stack.
*Sep 6 14:20:18.020: %STACKMGR-1-DUAL_ACTIVE_CFG_MSG: Chassis 2 R0/0: stack_mgr: Dual Active Detection link is available now
*Sep 6 14:20:34.954: %STACKMGR-6-CHASSIS_ADDED: Chassis 1 R0/0: stack_mgr: Chassis 2 has been added to the stack.
*Sep 6 14:19:51.660: %STACKMGR-6-STACK_LINK_CHANGE: Chassis 2 R0/0: stack_mgr: Stack port 2 on Chassis 2 is nocable
*Sep 6 14:19:51.660: %STACKMGR-6-STACK_LINK_CHANGE: Chassis 2 R0/0: stack_mgr: Stack port 1 on Chassis 2 is down
*Sep 6 14:20:22.636: %NIF_MGR-6-PORT_LINK_UP: Chassis 2 R0/0: nif_mgr: TwentyFiveGigabitEthernet Port 1 on front side stack link 0 is UP.
*Sep 6 14:20:22.637: %NIF_MGR-6-PORT_CONN_PENDING: Chassis 2 R0/0: nif_mgr: TwentyFiveGigabitEthernet Port 1 on front side stack link 0 connection is PENDING.
*Sep 6 14:20:23.957: %NIF_MGR-6-PORT_LINK_UP: Chassis 2 R0/0: nif_mgr: TwentyFiveGigabitEthernet Port 47 on front side stack link 0 is UP.
*Sep 6 14:20:23.957: %NIF_MGR-6-PORT_CONN_PENDING: Chassis 2 R0/0: nif_mgr: TwentyFiveGigabitEthernet Port 47 on front side stack link 0 connection is PENDING.
*Sep 6 14:20:27.661: %NIF_MGR-6-PORT_CONNECTION_STATUS_CHANGE: Chassis 2 R0/0: nif_mgr: PORT:TwentyFiveGigabitEthernet Port 1 changed state from Pending to Ready.
*Sep 6 14:20:27.661: %NIF_MGR-6-PORT_CONN_READY: Chassis 2 R0/0: nif_mgr: TwentyFiveGigabitEthernet Port 1 on front side stack link 0 connection is READY.
*Sep 6 14:20:27.662: %NIF_MGR-6-STACK_LINK_UP: Chassis 2 R0/0: nif_mgr: Front side stack link 0 is UP.
*Sep 6 14:20:27.662: %STACKMGR-6-STACK_LINK_CHANGE: Chassis 2 R0/0: stack_mgr: Stack port 1 on Chassis 2 is up
*Sep 6 14:20:32.665: %STACKMGR-6-CHASSIS_ADDED: Chassis 2 R0/0: stack_mgr: Chassis 2 has been added to the stack.
*Sep 6 14:20:34.071: %STACKMGR-6-CHASSIS_ADDED: Chassis 2 R0/0: stack_mgr: Chassis 2 has been added to the stack.
*Sep 6 14:20:56.706: %IOSXE_PEM-3-PEMFAIL: The PEM in Chassis 2 slot P1 is switched off or encountering a failure condition.
*Sep 6 14:20:56.306: %IOSXE_OIR-6-INSSPA: SPA inserted in chassis 2 subslot 1/0
*Sep 6 14:20:56.705: %IOSXE_PEM-6-INSPEM_FM: PEM/FM chassis 2 slot P0 inserted
*Sep 6 14:20:56.706: %IOSXE_PEM-6-PEMOK: The PEM in Chassis 2 slot P0 is functioning properly
*Sep 6 14:20:56.706: %IOSXE_PEM-6-INSPEM_FM: PEM/FM chassis 2 slot P1 inserted
*Sep 6 14:20:56.707: %IOSXE_PEM-6-INSPEM_FM: PEM/FM chassis 2 slot P2 inserted
*Sep 6 14:20:56.707: %IOSXE_PEM-6-PEMOK: The PEM in Chassis 2 slot P2 is functioning properly
*Sep 6 14:20:56.707: %IOSXE_PEM-6-INSPEM_FM: PEM/FM chassis 2 slot P3 inserted
*Sep 6 14:20:56.707: %IOSXE_PEM-6-PEMOK: The PEM in Chassis 2 slot P3 is functioning properly
*Sep 6 14:21:36.827: %IOSXE_REDUNDANCY-6-PEER: Active detected switch 2 as standby.
*Sep 6 14:21:36.912: %SMART_LIC-5-EVAL_START: Entering evaluation period
*Sep 6 14:21:36.914: %SMART_LIC-5-EVAL_START: Entering evaluation period
*Sep 6 14:21:36.825: %STACKMGR-6-STANDBY_ELECTED: Chassis 1 R0/0: stack_mgr: Chassis 2 has been elected STANDBY.
*Sep 6 14:21:41.778: %REDUNDANCY-5-PEER_MONITOR_EVENT: Active detected a standby insertion (raw-event=PEER_FOUND(4))
*Sep 6 14:21:41.778: %REDUNDANCY-5-PEER_MONITOR_EVENT: Active detected a standby insertion (raw-event=PEER_REDUNDANCY_STATE_CHANGE(5))

SW-BBLAB#show redundancy

Redundant System Information :

   Available system uptime = 1 hour, 10 minutes

Switchovers system experienced = 2
Standby failures = 0
Last switchover reason = user forced


             Hardware Mode = Duplex
Configured Redundancy Mode = sso
 Operating Redundancy Mode = sso
          Maintenance Mode = Disabled
            Communications = Up

Current Processor Information :

           Active Location = slot 1
    Current Software state = ACTIVE
   Uptime in current state = 11 minutes
             Image Version = Cisco IOS Software [Gibraltar], Catalyst L3 Switch Software (CAT9K_IOSXE), Version 16.12.1c, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2019 by Cisco Systems, Inc.
Compiled Mon 26-Aug-19 17:30 by mcpre
BOOT = flash:packages.conf;
CONFIG_FILE =
Configuration register = 0x102

Peer Processor Information :

          Standby Location = slot 2
    Current Software state = STANDBY HOT 
   Uptime in current state = 3 minutes
             Image Version = Cisco IOS Software [Gibraltar], Catalyst L3 Switch Software (CAT9K_IOSXE), Version 16.12.1c, RELEASE SOFTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2019 by Cisco Systems, Inc.
Compiled Mon 26-Aug-19 17:30 by mcpre
BOOT = flash:packages.conf;
CONFIG_FILE =
Configuration register = 0x102

SW-BBLAB#show version
Cisco IOS XE Software, Version 16.12.01c
Cisco IOS Software [Gibraltar], Catalyst L3 Switch Software (CAT9K_IOSXE), Version 16.12.1c, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2019 by Cisco Systems, Inc.
Compiled Mon 26-Aug-19 17:30 by mcpre

Cisco IOS-XE software, Copyright (c) 2005-2019 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License (“GPL”) Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or “License Notice” file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.

ROM: IOS-XE ROMMON
BOOTLDR: System Bootstrap, Version 16.12.1[FC2], RELEASE SOFTWARE (P)

SW-BBLAB uptime is 1 hour, 10 minutes
Uptime for this control processor is 42 minutes
System returned to ROM by SSO Switchover at 16:52:54 UTC Wed Aug 14 2019
System image file is “flash:packages.conf”
Last reload reason: LocalSoft

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Technology Package License Information:


Technology-package Technology-packageCurrent Type Next reboot

network-advantage Smart License network-advantage
dna-advantage Subscription Smart License dna-advantage
AIR License Level: AIR DNA Advantage
Next reload AIR license Level: AIR DNA Advantage

Smart Licensing Status: RESERVATION IN PROGRESS/EVAL MODE

cisco C9500-48Y4C (X86) processor with 1868748K/6147K bytes of memory.
Processor board ID XXXXXXXXXXX
3 Virtual Ethernet interfaces
96 TwentyFive Gigabit Ethernet interfaces
8 Hundred Gigabit Ethernet interfaces
32768K bytes of non-volatile configuration memory.
16010136K bytes of physical memory.
11161600K bytes of Bootflash at bootflash:.
1638400K bytes of Crash Files at crashinfo:.
15854592K bytes of USB Flash at usbflash0:.
0K bytes of WebUI ODM Files at webui:.
11161600K bytes of Bootflash at bootflash-2:.
1638400K bytes of Crash Files at crashinfo-2:.

Base Ethernet MAC Address : dc:8c:37:ee:d7:c0
Motherboard Assembly Number : 4873
Motherboard Serial Number : XXXXXXXXXXX
Model Revision Number : V02
Motherboard Revision Number : 4
Model Number : C9500-48Y4C
System Serial Number : XXXXXXXXXXXSwitch 02

Base Ethernet MAC Address : 78:bc:1a:0b:ca:80
Motherboard Assembly Number : 4873
Motherboard Serial Number : XXXXXXXXXXX
Model Revision Number : V02
Motherboard Revision Number : 4
Model Number : C9500-48Y4C
System Serial Number : XXXXXXXXXXX

Configuration register is 0x102

SW-BBLAB#redundancy force-failover
Proceed with switchover to standby RP? [confirm]
*Sep 6 15:09:51.372: %PARSER-5-HIDDEN: Warning!!! ‘ redundancy force-failover ‘ is a hidden command. Use of this command is not recommended/supported and will be removed in future.

[confirm]

Manual Swact = enabled

*Sep 6 15:10:08.189: %RF-5-RF_RELOAD: Self reload. Reason: redundancy force-switchover
*Sep 6 15:10:08.475: %SYS-5-SWITCHOVER: Switchover requested by red_switchover_process. Reason: redundancy force-switchover.Sep 6 15:10:13.821: %PMAN-3-RELOAD_RP: R0/0: pvp: Reloading: RP switchover initiated. This RP will be reloaded

Chassis 1 reloading, reason – Reload command
Sep 6 15:10:25.155: %PMAN-5-EXITACTION: C1/0: pvp: Process manager is exiting: reload fru action requested

SW-BBLAB#redundancy config-sync validate mismatched-commands
SW-BBLAB#
*Sep 9 10:22:29.526: CONFIG SYNC: MCL validation succeeded